|
|||||||||||||||||||||||||||||
ZIPPY TECHNOLOGY CORP
6U ATX Hot Swap Power Supply
ATX 300/400 Watt
- Designed for 6U Chassis
- Hot-Swappable/Hot-pluggable Capability
- Ball bearing cooling fans installed
- ATX Connectors
- Dimensions: 195.00x356.00x99.00(mm), 7.68x14.02x3.90(inch)
- 1 Year Warranty
- Input:
- VOLTAGE:
90 - 132 VAC / 180 - 260 VAC Switchable - FREQUENCY:
47 - 63 Hz
- 300/400 Watt OUTPUT
- INPUT CURRENT:
3A/1.5A PER UNIT(PARALLEL), 6A/3A(ONE POWER) - INRUSH CURRENT:
40A MAX. FOR 110 VAC, 80A MAX. FOR220 VAC
| Description | Output 1 | Output 2 | Output 3 | Output 4 | Output 5 | Output 6 |
|---|---|---|---|---|---|---|
| Voltage: | +5V DC | +12V DC | -5V DC | -12V DC | +3.3V DC | +5VSB |
| Maximum Load: | 30A/50A* | 11A | .5A/1A* | .5A/1A* | 25A/18A* | 800mA |
| Minimum Load: | 7A | 2.5A | 0A | 0A | 1A | 0A |
| Noise Max (P-P) | 50mV | 100mV | 150mV | 150mV | 50mV | 50mV |
| Load Regulation | ±5% | -10%~+14% | ±6% | -10%~+15% | ±5% | ±5% |
| Line Regulation | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% | Total Output Power: 300/400 Watt continuous maximum |
- Features:
- Temperature Range: Operating 0°C -- 50°C; Storage-20°C --80°C
- Dielectric withstand: Input/Output 1500 VAC for 1 second
- Efficiency: 60% Typical, at full load
- Humidity: OPERATING:20%-95%, NON-OPERATING:10%-95%
- Redundancy: Balance Share Load Method
- Overload Protection: 130 ~ 150% MAX.
- Safety: UL/CSA/TÜV Approval
- 5VSB Standby Voltage: A Low Current continuous 100mA Source At +5V, always enabled, can not be switched off
