Please wait...

PS518 | 300 Watt Hot Swap Power, 6U Case

Key Features

  • 300 Watt Hot Swap Power Supply
  • 95-132 VAC / 190-263 VAC Switchable
  • For 6U Case
PS518
Price: $314.00
Your preferred price
Qty in Cart: 0

Overview


Two Redundant Units:
Two identical units may be connected in parallel, each capable of
supplying the total required output. If one unit fails and can be removed
from the system (does not interfere with the operation of the other unit),
then the other unit supplies the required output.
SPECIFICATION:
􀁺 TEMPERATURE RANGE: OPERATING 0℃ -- 50℃; STORAGE -20℃ -- 80℃
􀁺 TRANSIENT RESPONSE: OUTPUT VOLTAGE RETURNS IN LESS THAN 1 ms MAX.
FOLLOWING A 50% LOAD CHANGE
􀁺 HOLD UP TIME: 16 ms MINIMUM AT FULL LOAD & NORMAL INPUT VOLTAGE
􀁺 DIELECTRIC WITHSTAND: INPUT / OUTPUT 1500 VAC FOR 1 SECOND
INPUT TO FRAME GROUND 1500 VAC FOR 1 SECOND
􀁺 HUMIDITY: 10 ~ 90% RH
􀁺 EFFICIENCY: 60% TYPICAL, AT FULL LOAD
􀁺 POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
􀁺 OVER LOAD PROTECTION: 130 ~ 150% MAX.
􀁺 OVER VOLTAGE PROTECTION: +5V 􀃆 5.5V ~ 7.0V, 3.3V: 3.8V ~ 4.5V
􀁺 OVER CURRENT PROTECTION: SHORT CIRCUIT
􀁺 ALARM METHOD: 1. AUDIO ALARM, 2. FAULT LED, 3. POWER DEFECTIVE SIGNAL
􀁺 EMI NOISE FILTER: AC INPUT LINE FILTER FOR FCC CLASS B ON EACH POWRE
UNIT ARE AVAILABLE UPON ORDER
􀁺 SAFETY: UL / CSA / TÜV APPROVAL
􀁺 HOT-SWAPPABLE / HOT-PLUGGABLE CAPABILITY
DIMENSION: 195.0 (D) x 356.00 (W) x 99.0 (H)
􀁺 REDUNDANCY: BALANCE SHARE LOAD METHOD

Specifications

Key Details
Manufacturer Zippy
Mfr Part No RAH-6300F
PSU Form Factor 6U ATX
Power Supply Output 300 W
Power Inlet Type AC
Physical Dimensions
Depth 195 mm
Width 356 mm
Height 99 mm
Weight 15 lbs
 
Power
Main Power Connector 24-Pin ATX
Redundant Yes
Hot Swappable Yes
Auto Switching Yes
Active PFC No
Environmental
80 Plus Rating No Rating

Loading...