6U, 14 or
20 Slot Backplane Case
Our industrial PC 6U rack-mount chassis supports our 14 or 20 slot passive
back-planes. This chassis has plenty of room for 12 drives with a lockable
front panel and an industrial 300 watt power supply. Please see
our accessory_page for ball
bearing chassis slides and other options.
Included with the chassis is a Temperature Alarm Module with two
temperature probes. If an over temperature condition occurs, or
a fan should fail the module
sounds an alarm, and the mother board fan sensor is triggered.
An alarm reset switch and two LED's are provided behind the access door.
Drive Bays: 4 exposed 5 1/4"
horizontal bays, 2 exposed 3 1/2" bays, and 6 internal 3 1/2"
hard drive bays, all in a removable shock-mounted chassis.
Cooling: a total of 8 ball bearing
fans are in this case for ultimate cooling. 3 fans are
behind the filtered front panel, 4 fans are behind the drive bays
and in front of the system board chassis and one fan in the power
supply.
Passive Backplane Chassis: a removable
backplane chassis supports long adaptor cards for all slot positions!
Power Supply: Your choice of 115/230 V AC
power supply are available with UL / CSA / TUV / FCC / CE approvals.
CS458 and CS658 are frames that fits
in the 5 1/4" bay and include a slim IDE CD-ROM drive.
It has space below for a second hard drive. This frame
will provide support for a hard drive and CD-ROM in the same bay.
The CS458 is beige and the CS658 is black.
See photo here.
Back-Plane Style systems require:a
Backplane board, a single board computer card, a CPU, and a cooling fan.
Back-Plane Board: NEW! MB613 is meant specifically for the new MB673 single board computer.
It has a special PICMG 1.3 slot on the far left position for a faster, more flexible bus.
It has two PCI Express slots (1 x16 slot, and 1 x8 slot with a x4 signal) followed by 9 PCI slots.
After the SBC is installed, there are 11 slots, and two blank slot positions for additional IO.
MB600 has a total of 14 slots, 7 ISA slots, 4 PCI slots,
and 3 PICMG slots for a single board computer or ISA use. 13 slots
will be free after the SBC card is installed. It is fully PICMG 2.1
Compliant.
MB602 has a total of 14 slots configured
with 5 ISA, 7 PCI and 2 PICMG slots for a single board computer or ISA use.
13 slots will be free after the SBC card is installed. It is fully
PICMG 2.1 Compliant with an active PCI bridge.
MB616 has a total of 14 slots configured
with 2 ISA, 10 PCI and 2 PICMG slots for a single board computer or ISA
use. 13 slots will be free after the SBC card is installed. It is
fully PICMG 2.1 Compliant with an active PCI bridge.
MB617 has a total of 14 slots configured
with 1 ISA, 12 PCI and 2 PICMG slots for a single board computer or ISA
use.
13 slots will be free after the SBC card is installed. It is fully
PICMG 2.1 Compliant with an active PCI bridge.
MB604 has a total of 19 slots. It is configured
with 13 ISA, 4PCI and 2 PICMG slots for a single board computer or ISA
use. 18 slots will be free after the SBC card is installed. It
is fully PICMG 2.1 Compliant.
MB618 has a total of 19 slots. It
is configured with 10 ISA, 7 PCI and 2 PICMG slots for a single board
computer or ISA use. 18 slots will be free after the SBC card is installed.
It is fully PICMG 2.1 Compliant..
MB619 has a total of 19 slots. It
is configured with 5 ISA, 12 PCI and 2 PICMG slots for a single board
computer or ISA use. 18 slots will be free after the SBC card is installed.
It is fully PICMG 2.1 Compliant..
MB606 has a total of 19 slots. It
is configured with 7 ISA, 10 PCI and 2 PICMG slots for a single board
computer or ISA use. 18 slots will be free after the SBC card is installed.
It is fully PICMG 2.1 Compliant with an active PCI bridge.
MB608 has a total of 19 slots. There
is 18 PCI and 2 PICMG slots for a SBC or ISA use. One PCI and
one PICMG slot is shared. It is fully PICMG 2.1 Compliant
MB607 offers up to two computers in one
case using a segmented backplane . It has a total of 18 slots.
It is designed with 2 segments. Each segment may have a its own
single board computer. Each segment has 3 ISA, 4 PCI and 2 PICMG
slots for a SBC or ISA use. The same power supply
is used for all segments and it is fully PICMG 2.1 Compliant
MB603 offers up to four computers in one
case using a segmented backplane .
It has a total of 20 slots. It is designed with 4 segments.
Each segment may have a its own single board computer. There are
3 PCI and 2 PICMG slots for a SBC or ISA use per segment. In most
cases each segment will have its own local drives and one CD-ROM per chassis
which could be shared across a network to the other segments. The
same power supply is used for all segments and it is fully PICMG 2.1 Compliant
Intel® Core™2 Quad and Core™2 Duo Single Board
Computers
MB673 Core™2 Duo Single Board Computer:
Supports LGA775 socket CPUs including Core™2 Quad, Core™2 Duo, Pentium™D, and P4/Celerons with
bus speeds up to 1066MHz. Based on the Intel® Q965 and ICH8DO chipsets, this SBC is packed with the latest features
including: support of up to 6 SATA 300 drives, 4GB DDR2 800 SDRAM, Dual Gigabit Ethernet, 8 USB 2.0 ports, 2 serial ports,
1 parallel port, 1 floppy channel, and Onboard video with Intel® Graphics Media Accellerator 3000 sharing up to 256MB
of system memory, and onboard audio too. The MB673 includes two additional PCI IO brackets: one for PS/2 keyboard and mouse
connections, and one for audio and additional USB connections. This SBC uses a special PICMG 1.3 connector, and is intended
exclusively for use with our MB613 backplane (listed above).
Intel® Core™2 Quad and Core™2 Duo Single Board Computer
MB673
Portwell Intel Q35 Core 2 duo PICMG 1.3
$723.00
Intel® Core™2 Quad and Core™2 Duo Processors
CP621
Intel Core 2 Duo E8400 (3.0 GHz, 6MB),
$269.00
CP622
Intel Core 2 Duo E8500 (3.16 GHz, 6MB
$285.00
CP623
Intel Core 2 Duo E8600 (3.33 GHz, 6MB)
$408.00
CP651
Intel® Core 2 Quad Q9400 2.66GHz,6MB
$290.00
CP629
Intel Core 2 Quad Q9550 (2.83 GHz, 12MB)
$393.00
DDR2-800 Memory
CP231
512mb DDR2-800 Memory
$22.00
CP232
1GB DDR2-800 Memory
$36.00
CP233
2GB DDR2-800 Memory
$68.00
MB674 Socket LGA 775: This SBC is based on the Intel® Q965 and ICH8 chipset.
It supports Intel® Core™2 Duo and Intel® Pentium® D processors with 1066/800/533 MHz FSB
and up to 4GB DDR2 800/667/533 SDRAM on dual 240-pin DIMM socket. The board contains Integrated Intel®
Graphics Media Accelerator 3000 with up to 256MB memory shared, dual 10BASE-T/100BASE-TX/1000BASE-T ethernet,
one FDD port, one parallel port, six USB ports, two serial ports, keyboard, mouse. Programable watchdog timer.
Onboard audio. Supports up to four SATA 300 drives.
Please call or email a sales representative for the latest available products
Intel® Core™2 Duo Processors
CP600
Intel Core 2 Duo E6320 (1.86 GHz, 4MB)
$228.00
CP601
Intel Core 2 Duo E6420 (2.13 GHz, 4MB)
$282.00
CP602
Intel Core 2 Duo E6600 (2.4 GHz, 4MB)
$258.00
CP603
Intel Core2 Duo E6700 (2.66GHz,4MB)
$363.00
DDR2-800 Memory
CP231
512mb DDR2-800 Memory
$22.00
CP232
1GB DDR2-800 Memory
$36.00
CP233
2GB DDR2-800 Memory
$68.00
Intel® Pentium® 4 Single Board Computers
MB668
Pentium 4, 800FSB Socket 478 Single Board Computer:
Designed with Intel's® 865 chipset, the MB668 single board computer supports P4 processors
with Hyper-Threading Technology with bus speeds up to 800MHz. It also supports up to
2GB of dual channel DDR400 SDRAM. The rear I/O features Gigabit ethernet LAN, 2 USB 2.0 ports,
PS/2 keyboard and mouse, and a VGA connector for its onboard Extreme Graphics 2.0.
Additional I/O are available on header connectors. It also has all the standard features for
embedded systems, such as programmable watchdog timer, hardware monitoring, modem-ring-on, and wake-on-LAN.
It also supports M-Systems
DiskOnChip flash disk on a chip. This system board supports IDE hard drives, listed below:
