New! 2U Compact ATX Case, 20.5" Deep with 6/7 bays.
The J2160 and J2660 are the first of a new line of reconfigurable cases, designed to adapt for your needs.
At only 20.5" deep, this new chassis is our shortest 2U that can house full size ATX boards, and full length PCI cards.
Its unique adaptable bay design allows for up to two removable 3.5" hard drives and a slim DVD±RW drive!
Three 80mm system fans, and a compartmentalized layout ensure cooling of all components, forcing airflow through all internal and exposed drive bays.
Both air intakes are also guarded with removable air filters for easy, tool-free maintenence.
Behind the wide lockable access panel are two front panel USB ports, system reset and ATX power switch, and controls for an optional thermal alarm.
Inside are four bays for hard drives suspended on shock-resistant vibration-dampening grommets.
An adjustable baffle and row of tie-down slots keep cables neatly secured.
Adjustable card-edge retainers are provided in two different lengths (three long and three short) to keep PCI cards securely fastened.
Three full-height card slots are available on the standard chassis with a wide range of riser cards to choose from.
With the optional 7-slot rear panel, up to seven low-profile PCI cards can be used.
Be sure to ask about custom paint and silkscreen options. Custom IO panels are also available.
Drive Bay Configurations:
The standard chassis is equipped with one 5.25" bay and one "low-profile" 5.25" bay with a 3.5" bay adapter.
"Low-Profile" bays are the same width as 5.25" bays, but only 30mm high.
1 5.25" bay, 1 3.5" bay:
The 3.5" bay is in a vented adapter for hard drives, card-readers, or any other 3.5" bay device.
1 5.25" bay, 1 Low-Profile 5.25" bay:
Storcase® model DE75 removable hard drives can be mounted directly into these low-profile bays.
CRU Dataport® model DPLP removable drives can also be mounted using the RK624/RK625 bracket.
2 Low-Profile 5.25" bays, 1 Slim-CD bay:
This setup allows for two removable hard drives to be mounted, without sacrificing an optical drive.
A slim CD/DVD drive and RK626/RK627 bracket are required.
Riser Card Options:
The options for riser cards depend greatly on the type of connectors available on the motherboard.
The riser card used must have slots at the correct height, and must attach to position-6 on the system board (counting from the slot farthest from the CPU).
For system boards with a PCI-Express x16 slot at position-6 (like the MB740) the riser card options are:
2 32-Bit PCI slots and 1 PCI-Express x16 using the RK664 riser card.
For system boards with a PCI-Express x1 slot at position-7 (such as MB725) extenders are added to the riser card:
2 32-Bit PCI slots and 1 PCI-Express x16 using the RK643 Slot-7 riser kit.
If you intend to use an older system board without a PCIe x16 slot, please call to inquire about the older riser card options.
Additional options will be added as more riser cards become available.
RK631 - Support for Full-Length PCI Cards
For PCI cards more than 240mm long, two of the internal hard drive bays can be removed for additional clearance.
For full support of full length PCI cards with retainer guides, this bracket can be added to the chassis.
It mounts in place of the two removed hard drive bays, and the retainers on the tails of long PCI cards are securely held in place.
Detailed Image
$8.00
RK628 - 7-Slot Rear Panel
If more PCI slots are needed in your 2U system, consider using low-profile PCI cards.
More and more card manufacturers are reducing the size of add-on cards to be compatible with the low-profile PCI standard.
This alternate rear panel replaces the standard rear panel, and provides 7 low-profile card slots.
7 blank PCI slot brackets are also included with this panel.
Detailed Image
$19.00
Intel® ATX System Boards, CPUs and RAM
MB734 - Intel® DH55HC Media Series Desktop Board
Embrace the era of HD with Intel® Desktop Board DH55TC designed to run with Intel® Core™ processors in the LGA1156 package.
Offered in ATX form factor and featured with VGA, DVI-D and HDMI® display connector for processors with Intel® Graphics Technology,
a PCI Express 2.0 x16 slot, 4 DIMMs slots for DDR3 memory, Intel® High Definition Audio (Intel® HD Audio) with 5.1 channel +2 channel
multi-streaming, six back panel USB 2.0 ports, the Intel® Desktop Board DH55HC is a building block for home theater PCs that maximizes
the power of the Intel® Core™ processors in the LGA1156 package. Note that this board supports onboard video only with CPUs featuring Integrated Graphics (listed below).
MB725 - Intel® DP55WG Media Series Desktop Board
The Intel® DP55WG board has the power for all your digital creations.
It features an LGA1156 socket for the new Core™i7 Processors, and supporting for four DDR3-1333 DIMMs.
On the rear panel are eight USB 2.0 ports, Firewire, Gigabit Lan, and high definition audio connections.
This board also packs some high-performance media features, including S/PDIF optical audio input and output ports,
and support for ATI Crossfire and NVIDIA SLI technology for the best audio and video options available.
Note that this board does not feature onboard video, so be sure to add a video card to your order.