OS Independent
Platform Independent
Patented IDE Direct Technology
Automatic Failover
Supports up to 4 drives
True Background Rebuild
Automatic Background Rebuild
Audible and Visual Alarms
Front Panel LED Status Lamps
Requires no Drivers, IRQs or TSRs
Individual Channel Control
Easy to use DupliDisk Management Utilities
Remote Notification (e-mail)
UDMA 100/66/33, IDE, EIDE Support
Supports Drives up to 144 PetaBytes
48 Bit LBA Support
Support for Mixed (Dissimilar) Drives
Fast Copy & Compare
DupliDisk3 PCI Install in a PCI card slot. Connect the first
cable from the system boards IDE / EIDE controller to the DupliDisk3.
Then connect one cable from the DupliDisk3 to the primary hard drive and
one cable to the mirrored drive. All status indicators and reset
switch will be on the rear of the computer chassis.
System
Features:
• OS Independent
• Platform Independent
• Patented IDE Direct Technology
• Plugs Directly into a PCI Slot on the Motherboard
(For power only)
• Supports up to 4 drives
• True Background Rebuild
• Audible and Visual Alarms
• LED Status Lights
• Requires no Drivers, IRQs or TSRs
• Individual Channel Control
• Easy to use DupliDisk Management Utilities and
OS Support
• Remote Notification (e-mail)
• Serial Port for Remote Administration (Optional)
• All necessary cables included
• UDMA 100/66/33, IDE, EIDE Support
• Supports Drives up to 144 PetaBytes
• 48 Bit LBA Support
• Support for Mixed (Dissimilar) Drives
• Fast Copy & Compare
Specifications
Drive Interface
IDE/E-IDE/UDMA
Data
Path
IDE/E-IDE/UDMA
Defined
by host controller
Hard Disk Interface
Cable
18 inches maximum
80
wire - 40 pin connector
Host
Interface
Cable 12
inches maximum
80 wire
- 40 pin connector
Electrical Input
Voltage 5V DC (+/- 5%)
Current: 450ma Operating, 600ma Peak
Physical Dimensions
Length:
4.725"
Width:
4.027"
Operating
Temperature: 10 to 40 degrees C
Humidity: 8 to 87% noncondensing
GT Part No
Description
Price
Order
CD235
Arco DupliDisk3 PCI, IDE RAID-1 Card
$239.00
DupliDisk3 3 1/2"
Bay Mount The DupliDisk3 Bay Mount slides perfectly into any
standard 3.5" floppy bay. This is the perfect solution where no PCI
slots are available. Slide the Bay Mount in place and connect your drives
and motherboard and DupliDisk3 will do the rest. The perfect solution for
Simple, Reliable and Affordable data protection
System
Features:
• OS Independent
• Platform Independent
• Patented IDE Direct Technology
• Plugs Directly into a PCI Slot on the Motherboard (For
power only)
• Supports up to 4 drives
• True Background Rebuild
• Audible and Visual Alarms
• LED Status Lights
• Requires no Drivers, IRQs or TSRs
• Individual Channel Control
• Easy to use DupliDisk Management Utilities and OS Support
• Remote Notification (e-mail)
• Serial Port for Remote Administration (Optional)
• All necessary cables included
• UDMA 100/66/33, IDE, EIDE Support
• Supports Drives up to 144 PetaBytes
• 48 Bit LBA Support
• Support for Mixed (Dissimilar) Drives
. Fast Copy & Compare
Specifications
Drive Interface
IDE/E-IDE/UDMA
Data
Path
IDE/E-IDE/UDMA
Defined by host controller
Hard Disk Interface
Cable
16 inches maximum
80
wire - 40 pin Connector
Host
Interface
Cable 14 inches maximum
80 wire - 40 pin
Connector
Electrical Input
Voltage 5V DC (+/- 5%)
Current: 450ma Operating, 600ma Peak
Physical Dimensions
Length: 5.88"
Width: 4.00"
Operating
Temperature: 10 to 40 degrees C
Humidity: 8 to 87% noncondensing
GT Part No
Description
Price
Order
CD231
Arco DupliDisk3 3.5" Bay, Beige
$239.00
CD232
Arco DupliDisk3 3.5" Bay, Black
$239.00
DupliDisk3 5 1/4"
Bay Mount The DupliDisk3 5.25 BayMount slides perfectly into
any standard 5.25” drive bay. This is the perfect solution where no
PCI slots are available. Slide the Bay Mount in place, connect your drives
and motherboard, and DupliDisk3 will do the rest. The perfect solution for
Simple, Reliable and Affordable data protection.
System
Features:
• OS Independent
• Platform Independent
• Patented IDE Direct Technology
• Plugs Directly into a PCI Slot on the Motherboard (For
power only)
• Supports up to 4 drives
• True Background Rebuild
• Audible and Visual Alarms
• LED Status Lights
• Requires no Drivers, IRQs or TSRs
• Individual Channel Control
• Easy to use DupliDisk Management Utilities and OS Support
• Remote Notification (e-mail)
• Serial Port for Remote Administration (Optional)
• All necessary cables included
• UDMA 100/66/33, IDE, EIDE Support
• Supports Drives up to 144 PetaBytes
• 48 Bit LBA Support
• Support for Mixed (Dissimilar) Drives
• Fast Copy & Compare
Specifications
Drive Interface
IDE/E-IDE/UDMA
Data
Path
IDE/E-IDE/UDMA
Defined by host controller
Hard Disk Interface
Cable
16 inches maximum
80
wire - 40 pin Connector
Host
Interface
Cable 14 inches maximum
80 wire - 40 pin
Connector
Electrical Input
Voltage 5V DC (+/- 5%)
Current: 450ma Operating, 600ma Peak
Physical Dimensions
Length: 5.88"
Width: 4.00"
Operating
Temperature: 10 to 40 degrees C
Humidity: 8 to 87% noncondensing
GT Part No
Description
Price
Order
CD233
Arco DupliDisk3 5.25" Bay, Beige
$239.00
CD234
Arco DupliDisk3 5.25" Bay, Black
$239.00
DupliDisk3 RAIDcase The DupliDisk3 RAIDcase is a complete RAID solution.
Our advanced power and bus management allow you to hot-swap drives from
the RAIDcase. If a drive fails, there is no need to shut down the computer.
Simply slide out the failed drive, slide in a replacement, and DupliDisk3
automatically* remirrors your data. A key lock on each drive caddy provides
complete security. RAIDcase is the ideal solution for your Disaster Recovery
plans as well
System Features:
• OS Independent
• Platform Independent
• Patented IDE Direct Technology
• Plugs Directly into a PCI Slot on the Motherboard (For power
only)
• Supports up to 4 drives
• True Background Rebuild
• Audible and Visual Alarms
• LED Status Lights
• Requires no Drivers, IRQs or TSRs
• Individual Channel Control
• Easy to use DupliDisk Management Utilities and OS Support
• Remote Notification (e-mail)
• Serial Port for Remote Administration (Optional)
• All necessary cables included
• UDMA 100/66/33, IDE, EIDE Support
• Supports Drives up to 144 PetaBytes
• 48 Bit LBA Support
• Support for Mixed (Dissimilar) Drives
• Fast Copy & Compare
Specifications
Drive Interface
IDE/E-IDE/UDMA
Data
Path
IDE/E-IDE/UDMA
Defined by host controller
Hard Disk Interface
Cable
length N/A
80 wire
- 40 pin Connector
Host
Interface
Cable 18 inches maximum
80 wire - 40 pin Connector
Electrical Input
Voltage 5V DC (+/- 5%)
Current: 650ma Operating, 825ma Peak
Physical Dimensions
Length: 8.50"
Width: 5.75"
Operating
Temperature: 10 to 40 degrees C
Humidity: 8 to 87% noncondensing
GT
Part No
Description
Price
Order
CD240
Arco
DupliDisk3 Raid Case, Beige
$499.00
CD244
Arco Extra
Caddy, Beige
$60.00
CD241
Arco
DupliDisk3 Raid Case, Black
$499.00
CD245
Arco Extra
Caddy, Black
$60.00
DupliDisk3 EzRAID EzRAID allows anyone to perform RAID1 data mirroring
of a hard drive quickly and easily. EzRAID is a true hardware solution.
It requires no software to be installed on your machine. Just plug it in
and it works. All RAID functions can be performed from the unit’s
buttons and front panel LCDs. (An optional software utility is also included
for those who prefer to control EzRAID from inside their Linux or Windows
OS.)
System Features:
• OS Independent
• Platform Independent
• Patented IDE Direct Technology
• Plugs Directly into a PCI Slot on the Motherboard (For power
only)
• Supports up to 4 drives
• True Background Rebuild
• Audible and Visual Alarms
• LED Status Lights
• Requires no Drivers, IRQs or TSRs
• Individual Channel Control
• Easy to use DupliDisk Management Utilities and OS Support
• Remote Notification (e-mail)
• Serial Port for Remote Administration (Optional)
• All necessary cables included
• UDMA 100/66/33, IDE, EIDE Support
• Supports Drives up to 144 PetaBytes
• 48 Bit LBA Support
• Support for Mixed (Dissimilar) Drives
• Fast Copy & Compare
Specifications
Drive Interface
IDE/E-IDE/UDMA
Data
Path
IDE/E-IDE/UDMA
Defined by host controller
Hard Disk Interface
Cable
length N/A
80 wire
- 40 pin Connector
Host
Interface
Cable 18 inches maximum
80 wire - 40 pin Connector
Electrical Input
Voltage 5V DC (+/- 5%)
Current: 650ma Operating, 825ma Peak
Physical Dimensions
Length: 8.50"
Width: 5.75"
Operating
Temperature: 10 to 40 degrees C
Humidity: 8 to 87% noncondensing
GT Part No
Description
Price
Order
CD242
Arco DupliDisk3 EzRaid Case, Beige
$599.00
CD244
Arco Extra Caddy, Beige
$60.00
CD243
Arco DupliDisk3 EzRaid Case, Black
$599.00
CD245
Arco Extra Caddy, Black
$60.00
DupliDisk3
3 1/2" Flex Mount
The FlexMount version of the DupliDisk3 provides all of the same advanced
features as our other models in a compact design, about the size of a pack
of playing cards. The FlexMount can literally fit anywhere inside your computer.
It does not take up a slot or bay. Ideal where space is at premium. Includes
a PCI slot bracket with serial port, status lights, and an alarm-reset button.
Protective and insulating, high-impact, plastic shell protects the DupliDisk3
from other electrical components
System Features:
• OS Independent
• Platform Independent
• Patented IDE Direct Technology
• Plugs Directly into a PCI Slot on the Motherboard (For power
only)
• Supports up to 4 drives
• True Background Rebuild
• Audible and Visual Alarms
• LED Status Lights
• Requires no Drivers, IRQs or TSRs
• Individual Channel Control
• Easy to use DupliDisk Management Utilities and OS Support
• Remote Notification (e-mail)
• Serial Port for Remote Administration (Optional)
• All necessary cables included
• UDMA 100/66/33, IDE, EIDE Support
• Supports Drives up to 144 PetaBytes
• 48 Bit LBA Support
• Support for Mixed (Dissimilar) Drives
• Fast Copy & Compare
Specifications
Drive Interface
IDE/E-IDE/UDMA
Data
Path
IDE/E-IDE/UDMA
Defined by host controller
Hard Disk Interface
Cable
16 inches maximum
80
wire - 40 pin Connector
Host
Interface
Cable 14 inches maximum
80 wire - 40 pin Connector
Electrical Input
Voltage 5V DC (+/- 5%)
Current: 450ma Operating, 600ma Peak
Physical Dimensions
Length: 4.725"
Width: 4.027"
Operating
Temperature: 10 to 40 degrees C
Humidity: 8 to 87% noncondensing
GT Part No
Description
Price
Order
CD237
Arco DupliDisk3 FlexMount
$260.00
DupliDisk3
No-Slot Version The DupliDisk3 NoSlot is perfect in custom designed PCs
where there is room to mount the NoSlot directly to the chassis. It features
all of the same functionality as our other models. Its measurements allow
it to be placed in any standard drive enclosure as well. This is a favorite
design for our OEM customers.
System Features:
• OS Independent
• Platform Independent
• Patented IDE Direct Technology
• Plugs Directly into a PCI Slot on the Motherboard (For power
only)
• Supports up to 4 drives
• True Background Rebuild
• Audible and Visual Alarms
• LED Status Lights
• Requires no Drivers, IRQs or TSRs
• Individual Channel Control
• Easy to use DupliDisk Management Utilities and OS Support
• Remote Notification (e-mail)
• Serial Port for Remote Administration (Optional)
• All necessary cables included
• UDMA 100/66/33, IDE, EIDE Support
• Supports Drives up to 144 PetaBytes
• 48 Bit LBA Support
• Support for Mixed (Dissimilar) Drives
• Fast Copy & Compare
Specifications
Drive Interface
IDE/E-IDE/UDMA
Data
Path
IDE/E-IDE/UDMA
Defined by host controller
Hard Disk Interface
Cable
16 inches maximum
80
wire - 40 pin Connector
Host
Interface
Cable 14 inches maximum
80 wire - 40 pin Connector
Electrical Input
Voltage 5V DC (+/- 5%)
Current: 450ma Operating, 600ma Peak
Physical Dimensions
Length: 4.725"
Width: 4.027"
Operating
Temperature: 10 to 40 degrees C
Humidity: 8 to 87% noncondensing
GT Part No
Description
Price
Order
CD236
Arco DupliDisk3 No-Slot, IDE RAID-1
$239.00
DupliDisk3
MicroRAID The DupliDisk3 MicroRAID is a complete RAID
solution. This unique design incorporates our DupliDisk3 IDE RAID Controller
and two 2.5” drives in a compact design that takes up one 3.5”
bay. It is the size of a standard floppy drive! Ideal in space constricted
environments or where no PCI slots or 5.25” bays are available.
System
Features:
• OS Independent
• Platform Independent
• Patented IDE Direct Technology
• Plugs Directly into a PCI Slot on the Motherboard
(For power only)
• Supports up to 4 drives
• True Background Rebuild
• Audible and Visual Alarms
• LED Status Lights
• Requires no Drivers, IRQs or TSRs
• Individual Channel Control
• Easy to use DupliDisk Management Utilities and OS Support
• Remote Notification (e-mail)
• Serial Port for Remote Administration (Optional)
• All necessary cables included
• UDMA 100/66/33, IDE, EIDE Support
• Supports Drives up to 144 PetaBytes
• 48 Bit LBA Support
• Support for Mixed (Dissimilar) Drives
• Fast Copy & Compare
